You're currently on:
Corvette - 1 - 3.8 litre Wall Kettle
The Corvette wall kettle delivers boiling water for drinks and washing up needs from a permanently wired installation.
- Quick and easy installation
- Can boil form 1 litre to a maximum of 3.8 litres
- Easy to read water level indicator
- Detachable hose supplied for temporary installation
- Economical to use
- High quality stainless steel sheathed element
- Stainless steel base plate
- 2.2kW @ 240V
- Auto switch off at boiling point
- Rapid reset
- Neon glows when water is being heated
- Extended spout for extra safe pouring
- Safety auto steam switch
- 2-stage boil dry element protection
- Plumbing-in kit required for permanent supply
- Electrical connection via a fused spur
- Water entry via filler hose supplied, optional plumbing kit, or manually
- Unit can be positioned over a sink or suitable outlet
- Supplied 1m cable, cable tidy, wall mounting plate, wall fixing kit, 1m filler hose
- Plumbing-in kit to connect the Corvette directly to the cold water mains
- Extended length filler hose 1.7m
- Extended length outlet spout 330mm
- Tap adapter kit to connect the filler hose to non-standard taps
- Outer Casing: High impact, durable thermoplastic.
- Heat Unit: High quality stainless steel sheathed element.
- Insulation: CFC-free insulation.
- Water Container: High impact, thermoplastic.
- Thermostat: Steam switch. Auto re-set over-temperature cut-out.
- Operating Pressure: Mains pressure supply